Not only does Hydro Seal add a protective coating to un-coated vehicles, it also helps maintain and improve existing coatings. These include ceramic and graphene coatings, waxes, polishes and other sealants. Suitable for domestic, commercial and professional valet work.

KEY BENEFITS:

Easy to use via snow foam cannon

Can also be used via low pressure spray

Helps maintain gloss

Impressive hydrophobic properties

Assists with drying the vehicle

Maintains and boosts current coatings, waxes, polishes and sealants

Spray on, wash off formulation

DIRECTIONS FOR USE:

Dilute 1:4 for first time coating (no current protection)

Dilute 1:9 for maintenance washes (maintain current protection)

Always shake well before use

1. Ensure vehicle has been fully cleaned and is wet.
2. Apply preferred solution to the vehicle, avoid contact with glass (windscreen and windows) if you can.
3. Leave for no longer than 2 minutes.
4. Wash off with clean high pressure water

If you would like products for your own brand, check out our white label company: Powerclean Chemicals Ltd

The post HYDRO SEAL appeared first on Molecular UK.

This brilliant ceramic detailer also contains the same brilliant gloss enhancers found in our SPARKLE Detailing Spray. This ensures your vehicle gets that outstanding high gloss, showroom shine finish on top of the added protection.

Another benefit of Synthesis is its multiple applications. It can be applied to a dry vehicle by spraying a few light mists per panel, wiped in and buffed to a shine. It can also be applied to a wet vehicle as a drying or rinse aid. To use as a drying aid simply clean and wet the vehicle, apply a light mist to a panel and dry with a drying towel. To use as a rinse aid simply clean and wet the vehicle, spray onto the surface and rinse off. Suitable for professional level valet and detailing work, or general commercial work.

KEY BENEFITS:

Multi application

Use on dry or wet vehicles

Improves water beading

Gives added protection

Boosts durability of existing coatings, waxes, polishes and other sealants

Contains active Si02 ingredient

Enhances gloss

Use on paint, plastics, glass, rubber, wheels and metals

Use as a rinse aid

DIRECTIONS FOR USE:

DRY APPLICATION:

1. Shake well before use – ensure vehicle has been fully cleaned.
2. Apply a small amount of SYNTHESIS onto a small section or body panel at a time. Do not allow to dry.
3. Wipe the applied surface with a clean microfibre cloth.
4. Buff with a separate clean microfibre cloth.
5. Repeat steps 2-4 until the whole vehicle has been done.

WET APPLICATION – RINSE AID:

1. Ensure vehicle is wet and fully cleaned.
2. Apply SYNTHESIS to the wet surface.
3. Wash off then dry.

WET APPLICATION – DRYING AID:

1. Ensure vehicle is wet and fully cleaned.
2. Apply a light mist of SYNTHESIS to 1 panel.
3. Dry panel with a clean drying towel.
4. Repeat steps 2-3 until vehicle is completed.

The post SYNTHESIS appeared first on Molecular UK.

– DILUTION RATES:

Heavy Soiling: 1:5 parts water

Light Soiling: 1:10 parts water

– DIRECTIONS FOR USE:

Vinyl, Rubber & Plastics:

1. Spray Electron directly onto your clean microfibre cloth.
2. Apply the cloth to the area, wipe then buff off any excess residue.
3. If heavy soiling, spray directly onto the surface area and leave to dwell for up to 1 minute.
4. Agitate with a soft brush then wipe and buff off.

Interior Carpets:

1. Spray a liberal amount of Electron to the affected area and leave to dwell up to 2 minutes.
2. Agitate with a soft brush in circular motions.
3. Wipe away any excess product with a clean microfibre cloth.

The post ELECTRON X appeared first on Molecular UK.

Make sure when using Evolution X that you are wearing gloves and goggles for protection. For best results, make sure you wash off as much dirt and grime as you can with a pressure washer or hose prior to application. Do not use in direct sunlight.

– Dilution Rates:

Heavy/Medium Soiling: Dilute 1:2 parts water

Light Soiling: Dilute 1:9 parts water

– DIRECTIONS FOR USE:

1. Ensure the wheels are cool to the touch.
2. Wash off any excess dirt and grime with a pressure washer or hose.
3. Spray a liberal amount of Evolution to the wheels and agitate with a wheel cleaning brush.
4. Wash off with a pressure washer or hose then dry.

The post EVOLUTION X appeared first on Molecular UK.

– Dilution Ratio:

Dilute up to 1:9 in a clean trigger spray bottle.

– Directions for use:

1. Ensure you vehicle has been thoroughly cleaned, removing all dirt and grime.
2. Spray the solution onto a wet and clean vehicle.
3. Once the vehicle has been sprayed, wash off with clean water then dry.

The post HYDROPHOBE X appeared first on Molecular UK.

Big Bang X can be diluted up to 1:100 parts water, depending on soiling, and can also be used in your foaming lance or mixed with a snow foam.

Directions For Use:

1. Ensure that the surface is cool before application.
2. Apply directly onto the area needed, using a trigger sprayer, pump spray or foaming lance.
3. Allow up to 5 minutes contact time.
4. Wash off with a pressure washer or hose.

The post BIG BANG X appeared first on Molecular UK.

Made to use for professional commercial cleaners. Can be applied by low pressure spray, bucket and sponge or by wheel brush.

Directions For Use:

SHAKE WELL BEFORE USE.

Dilute one part product with up to 8 parts water, or use as required.
Apply by brush or low pressure hand spray.
Rinse off with plenty of water after suitable contact time.

CAUTION:

• Strongly acidic. A test area should be tried before total cleaning is attempted. Avoid overspray. Do not allow contact with glass.

DO NOT ALLOW WHEEL ACID TO DRY OR BAKE ON THE SURFACE.

If you would like any of these products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post WHEEL XTREME appeared first on Molecular UK.