Safely removes dirt, oil, grease and grime with ease. A biodegradable product that is safe to use on ferrous and non-ferrous metals, plastics, rubber and glass.

Dilute as required; typically between 1:50 – 1:100 parts water.

Key benefits from our Ultrasonic Cleaner Fluid:

– Water soluble

– Non-flammable

– Non-toxic

– Biodegradable

– Highly Concentrated

– Removes dirt, grime, grease and oil

Always test sample diluted solution prior to full application.

.

If you would like products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post ULTRASONIC CLEANING FLUID appeared first on Molecular UK.

A highly flammable product due to its high solvent content.

DIRECTIONS:

• Apply the solution by brush or low pressure spray.
• Allow 5 – 10 minutes contact time to activate, then rinse off with plenty of clean, high pressure water.
• Can be used in a parts wash machine.

Hazardous Delivery Charges Apply (see delivery & returns for more information)

If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post SOLVENT DEGREASER appeared first on Molecular UK.

Safe to use on acrylic finishes. ALWAYS use in a well ventilated space.

DIRECTIONS:

• Apply Panel Prep to a cloth and lightly rub into the area to be cleaned.
• Wipe off with a separate, dry cloth.
• Repeat if necessary.

Hazardous Delivery Charges Apply (see delivery & returns for more information)

If you would like products for our brand, check out our white label company Powerclean Chemicals Ltd.

The post PANEL PREP appeared first on Molecular UK.

Apply to parts  by means of hand spray.

IMPORTANT NOTE:
Test brakes after cleaning & reassembly

Hazardous Delivery Charges May Apply (see delivery & returns for more information)

If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post BRAKE & CLUTCH appeared first on Molecular UK.

Can be applied by hand/mop or in conjunction with high pressure washing equipment, including industrial floor cleaning equipment.

Dilutions:

• Heavy Soiling: Dilute 1:10 parts water
• Medium Soiling: Dilute 1:20 – 50 parts water
• Light Soiling: Dilute 1:50 – 100 parts water

Directions:

• Floor cleaning equipment; follow your machine manual.
• Pressure washing, set the detergent control to give a 1% – 5% solution.
• Bucket and mop; follow the dilution guide but mix with hot water. Apply then wait to dry.

• If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post POWERTECH PLUS appeared first on Molecular UK.

Directions:

• For general applications dilute Pine Disinfectant 125mls per 5 litres of water (1-40 parts water or 2.5%).
• For certain areas, this concentration may be increased or used undiluted if required.
• Apply by mop, bucket & sponge, pressure washer or your preferred application method.
• Wipe dry if necessary.

If you would like any of these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post PINE DISINFECTANT appeared first on Molecular UK.

Algicide is a non-corrosive, chlorine free product that can be diluted to the strength required. Great for use on motorhome & caravans. Contains a blend of quaternary ammonium compound and non-ionic surfactants.

Directions For Use:

• Dilute 1 part solution to 20 parts water for regular use, as required.
• Apply by brush, mop or low pressure spray & allow up to 15 minutes contact time.
• Agitate with a brush if necessary, then rinse off with clean high pressure water.
• Re-apply a solution of 1 part Algicide to 10 parts clean water to retard further growth.

If you would like any of these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post ALGICIDE appeared first on Molecular UK.

Suitable for killing a wide variety of bacteria, yeasts and moulds including E.Coli. Contains approved quaternary ammonium compound, Benzalkonium Chloride, conforming to BS EN 1276.

Directions:

• For general sanitising, dilute as required (up to 1:50) in water. Apply by brush, mop, cloth, low pressure spray or through pressure washer.
• Leave to dwell for at least 30 seconds then wipe clean.

For use in water recycling systems, follow instructions in the manual provided with the system being used.

If you would like any of these products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post RECLAIM SANITISER appeared first on Molecular UK.

For use in portaloos, coaches, lorries, caravans and aircraft toilets. A formaldehyde free product.

DIRECTIONS:

• Dilute with water to required strength. (typically 1 part solution to 20-50 parts water.
• Place diluted solution into the holding tank, as required.

If you would like any of these products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post BLU TOILET appeared first on Molecular UK.

DIRECTIONS:

Dilute up to 1:100 parts water.

Apply solution by preferred method.

NOTE: DO NOT mix with other chemicals.

If you would like products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post POWER FRESH appeared first on Molecular UK.

Interior Plus can be applied via low pressure spray or by water extraction machines. Simply dilute to the strength required prior to application. If using a wet vac machine, dilute no more than 1:50 parts water.

Directions For Use:

• For machine use dilute into the machine tank to a maximum of 1:50.
• For manual use dilute 1:10 parts water.
• Apply the solution to the effected area.
• Agitate with a brush or sponge paying particular attention to heavy soiling.
• Wipe away with a clean damp cloth or microfibre towel.
• Molecular Tip: Agitate solution for extra foam.

The post INTERIOR PLUS appeared first on Molecular UK.

Carpet Shampoo Xtra has been formulated for professional use through water extraction machines (wet vac). Can also be applied via low pressure sprayer. A highly concentrated product for further economy.

Directions For Use:

• Add 100-200mls per 5 litres of warm water into the solution tank. Experience in different conditions will determine the exact strength required.
• Apply the solution to the area using your preferred application method.
• Agitate with a brush if applied by low pressure sprayer. Wipe dry if needed.
• Allow up to 24 hours to dry.

Molecular Tip: Ventilate well if using to clean vehicle interiors.

NOTE:  Always spot test a small, hidden area before undertaking a full clean. This product is for periodic, Professional cleaning only and not suitable for frequent routine cleaning. Over concentration could cause damage.

The post CARPET SHAMPOO XTRA appeared first on Molecular UK.