For use in conjunction with high pressure cleaning equipment. Can be applied by low pressure sprayer. Use in conjunction with foam making equipment due to its high foaming power. Safe to use on ceramic coatings.

Directions For Use:

• Dilute to the strength required for manual use (typically up to 1:10, depending on soiling).
• Or; Set the detergent control of your pressure washing machine to give a 2%-5% solution.
• Apply solution to the vehicle until it has been completely covered.
• Rinse well after application.

Product can also be used via a snow foam lance at a dilution of 1:5 – 1:10

The post NEU-PRO appeared first on Molecular UK.

For the best results it is recommended for use in high pressure cleaning systems, but it can be diluted into a low pressure spray if necessary.

Directions For Use:

Set the detergent control to give a 1% – 5% solution or as required (UP TO 1:50).
Apply evenly, starting at the bottom and working your way upwards.
Allow up 5 minutes contact time, then wash off thoroughly with clean high pressure water.

If you would like M.W.T. caustic free TFR with rinse aid, or any other products we offer for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post M.W.T. appeared first on Molecular UK.

Titan caustic free TFR is to be used in conjunction with high pressure cleaning systems. Can be diluted into a low pressure spray if needed.

Directions For Use:

Set the detergent control to give a 1% – 5% solution or as required (UP TO 1:50).
Apply evenly, starting at the bottom and working your way upwards.
Allow up 5 minutes contact time, then wash off thoroughly with clean high pressure water.

If you would like Titan, or any other another products we make for your  own brand, please check out our white label company Powerclean Chemicals Ltd.

The post TITAN appeared first on Molecular UK.

This incredible high active TFR not only cleans dirt, but can also be used as a degreaser. Can be used for chassis and engine cleaning and degreasing.

Directions For Use:

Set the detergent control to give a 1% – 5% solution as required (UP TO 1:50).
Apply evenly, starting at the bottom and working your way upwards.
Allow up 5 minutes contact time, then wash off thoroughly with clean high pressure water

If you would like any of these great products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post G-FORCE appeared first on Molecular UK.

Cleans vehicle exteriors with ease. Breaks down traffic film, grime, dirt and grease. This product was formulated as a non-contact cleaner, reducing the chances of scratches and swirls. Suitable for both industrial and commercial use.

An extremely popular product that is supplied to a whole host of different brands and franchises nationwide.

Directions For Use:

Adjust your machine’s detergent control and air flow to the required rate, or dilute no more than 1:10 parts water in your foaming lance bottle.
Apply the solution evenly, ensuring you cover your vehicle from top to bottom. Allow up to 5 minutes contact time.
Wash the solution off with clean high pressure water.

If you would like products like this for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post GRAUPEL appeared first on Molecular UK.

This special product not only removes traffic film, but also removes grime, oil, grease and can be used as a chassis and engine cleaner. Has excellent cleaning and degreasing power. Suitable for commercial truck, bus, and agricultural cleaning, as well as detail focused valet cleaning.

Vital Wash is a commercial grade TFR that is supplied nationwide to distributors under their own brand. The ideal TFR for all commercial vehicle cleaning, including lorries, trucks, busses, coaches and agricultural vehicles, machinery and trailers.

Directions For Use:

Set the detergent control to give a 1% – 5% solution, as required.
Apply evenly, starting at the bottom and working your way upwards.
Allow up 5 minutes contact time, then wash off thoroughly with clean high pressure water.

If you would like any of these great products for your own brand, please go and check out our white label company Powerclean Chemicals Ltd.

The post VITAL WASH appeared first on Molecular UK.

Ex-Germinate heavy duty sanitiser is the perfect cleaner for abattoirs, food factories, food carrying vehicles, and other areas where it is vital for a high standard of hygiene. Used for cleaning plant, equipment, utensils, floors, walls and other hard surfaces. Suitable for heavy duty industrial cleaning purposes. Disperses fats making it ideal to use in the food transport & engineering industries.

This truly great product can also be applied via low pressure pump sprayers, bucket and mop or by trigger sprayers. Simply dilute to the strength required prior to application.

Directions For Use:

1. Set the detergent control to give a 1% – 5% solution at the nozzle as required.
2. Apply the cleaning solution to the area being cleaned and allow up to 5 minutes contact time for activation.
3. After suitable contact time, rinse thoroughly with clean high pressure water.

If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post EX-GERMINATE appeared first on Molecular UK.

This brilliant TFR is used nationwide on all kinds of commercial vehicle including, buses, trucks, lorries and agricultural vehicles including tractors and trailers. The ideal vehicle cleaner for large or small fleets.

DIRECTIONS FOR USE:

Ensure the vehicle is cool to the touch before application. Set the detergent control to give a 1% – 5% solution or as required. Apply the solution evenly, starting at the bottom of the vehicle and working upwards. After suitable contact time, rinse off with clean high pressure water. Do not allow the solution to dry out on the vehicle.

If you would like these products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post LEGION appeared first on Molecular UK.

DILUTION RATES:

HEAVY SOILING: Neat or 1:1

LIGHT / MEDIUM SOILING: Up to 1:10

DIRECTIONS FOR USE:

1. Ensure that the surface is cool before application.
2. Apply solution directly onto the vehicle, using a trigger sprayer, pump spray or foaming lance.
3. Allow up to 5 minutes contact time.
4. Wash off with a pressure washer or hose.

If you would like these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post BIG BANG appeared first on Molecular UK.