DIRECTIONS FOR USE:

Hand Application:

1. Ensure the vehicle paintwork is clean, dry and out of direct sunlight.
2. Apply 2-4 drops of Supernova polish via a foam applicator pad and apply to the surface using circular motions. Only apply to 1 small panel at a time. Do not allow to dry.
3. Once applied, buff with a clean microfibre cloth or buffing towel.

• Machine Polish (Rotary):

1. Ensure the vehicle paintwork is clean, decontaminated, dry and out of direct sunlight.
2. Apply 2-4 inch drops onto the polishing pad and spread evenly onto 1 panel at a time using the lowest speed setting. If applying to a bonnet, work on 1/2 of the panel at a time.
3. Once area has been covered, increase the speed to no more than 1000RPM and carefully go over the applied area.
4. Once the residue starts to clear, go back down to the lowest setting for a final cover.
5. Leave for a couple of minutes, then buff with a clean microfibre towel.

• Machine Polish (Dual Action):

1. Ensure the vehicle paintwork is clean, decontaminated, dry, and out of direct sunlight.
2. Apply 2-4 inch drops onto the polishing pad and spread evenly onto 1 panel at a time using the lowest speed setting. If applying to a bonnet, work on 1/2 of the panel at a time.
3. Once area has been covered, increase the speed to no more than 4000 OPMs and carefully go over the applied area.
4. Once the residue starts to clear, go back down to the lowest setting for a final cover.
5. leave for a couple of minutes, then buff with a clean microfibre towel.

If you would like these products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post SUPERNOVA appeared first on Molecular UK.

Make sure when using Evolution Wheel Cleaner that you are wearing gloves and goggles for protection. For best results, make sure you wash off as much dirt and grime as you can with a pressure washer or hose prior to application. Do not use in direct sunlight.

DIRECTIONS FOR USE:

1. Ensure the wheels are cool to the touch.
2. Wash off any excess dirt and grime with a pressure washer or hose.
3. Spray a liberal amount of Evolution to the wheels and agitate with a wheel cleaning brush.
4. Wash off with a pressure washer or hose then dry.

If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post EVOLUTION appeared first on Molecular UK.

We believe we have gone one better as ours contains some of the key ingredients used in our Sparkle detailing spray to leave the car not only clean, but topped off with a glistening shine. Mirage is the ultimate dry wash & detail spray in one product. No water required, simply spray on and wipe off, then buff to leave a polished finish. It takes just 15 minutes to clean an average sized car. Our product is uniquely coloured, has a pleasant lemon citrus perfume, is pH neutral and contains Nano type silicones to give that gloss finish.

DIRECTIONS FOR USE:

1. Shake well before use.
2. Apply a small amount of Mirage to a small panel or section of your vehicle at a time. Do not allow to dry.
3. Wipe the applied surface with a clean microfibre cloth.
4. Buff with a separate clean microfibre cloth.
5. Repeat steps 2-4 until the whole vehicle is complete.
6. Repeat if necessary.

If you would like products for your own brand, check out our whit label company Powerclean Chemicals Ltd.

The post MIRAGE appeared first on Molecular UK.

Blizzard is to be used through foam making equipment, however, it can be used through a low pressure pump sprayer. Dilute Blizzard alkaline snow foam with up to 5 parts water in your foaming lance bottle.

DIRECTIONS FOR USE:

1. Ensure that the vehicle is cool to the touch.
2. Dilute up to 4 parts water, 1 part solution into your foaming lance bottle.
3. Apply to vehicle bodywork, covering it from bottom to top.
4. Leave to dwell for up to 5 minutes.
5. Rinse off thoroughly with a pressure washer or hose

Molecular Tip: Add into a bucket to use as a shampoo.

If you would like these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post BLIZZARD appeared first on Molecular UK.

DILUTION RATES:

HEAVY SOILING: Neat or 1:1

LIGHT / MEDIUM SOILING: Up to 1:10

DIRECTIONS FOR USE:

1. Ensure that the surface is cool before application.
2. Apply solution directly onto the vehicle, using a trigger sprayer, pump spray or foaming lance.
3. Allow up to 5 minutes contact time.
4. Wash off with a pressure washer or hose.

If you would like these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post BIG BANG appeared first on Molecular UK.

Frequency can also be used as a pre-spotter or as a traffic film remover and degreaser.

As Frequency is a highly concentrated all purpose cleaner you will need to dilute it to the strength required prior to application. Apply by low pressure spray, trigger spray or by bucket and sponge.

One of the most popular products in the Molecular UK range.

DILUTION RATIOS:

HEAVY SOILING : Use neat OR Dilute 1:1
MEDIUM SOILING: 1:9 parts water
LIGHT SOILING: 1:19 parts water

DIRECTIONS FOR USE:

1. Apply your preferred, diluted solution to the required vehicle area via low pressure spray, sponge or brush.
2. Leave to dwell for up to 5 minutes, agitate if necessary.
3. Wipe off with a clean microfibre cloth.

If you would like these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post FREQUENCY appeared first on Molecular UK.

Aurora can also be used on commercial, industrial and domestic glass, windows and mirrors.

Directions For Use:

1. Spray directly onto the vehicle surface you would like to clean.
2. Wipe with a clean microfibre cloth or paper towel.
3. Buff with a clean microfibre cloth or paper towel if needed.
4. Repeat steps 1-3 if necessary.

Molecular Tip: For use on tinted car windows, spray onto microfibre cloth rather than directly onto the surface.

Keep an eye on our glass cleaning category for more glass cleaners.

If you would like these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post AURORA appeared first on Molecular UK.

DIRECTIONS FOR USE:

• Hand Application:

1. Ensure the vehicle paintwork is clean, dry and out of direct sunlight.
2. Apply 2-4 drops of Spectrum to your foam applicator pad and apply to the vehicle surface using circular motions. Work 1 small panel at a time. Do not allow to dry.
3. Buff with a clean microfibre cloth.

• Machine Polish (Rotary):

1. Ensure the vehicle paintwork is clean, decontaminated, dry and out of direct sunlight.
2. Apply 2-4 inch drops onto the polishing pad and spread evenly onto 1 body panel at a time using the lowest speed setting. If applying to a bonnet, work on 1/2 of the panel at a time.
3. Once area has been covered, increase the speed to no more than 1000RPM and carefully go over the applied area.
4. Once the residue starts to clear, go back down to the lowest setting for a final cover.
5. Leave for a couple of minutes, then buff with a clean microfibre towel.

• Machine Polish (Dual Action):

1. Ensure the vehicle paintwork is clean, decontaminated, dry, and out of direct sunlight.
2. Apply 2-4 inch drops onto the polishing pad and spread evenly onto 1 body panel at a time using the lowest speed setting. If applying to a bonnet, work on 1/2 of the panel at a time.
3. Once area has been covered, increase the speed to no more than 4000 OPMs and carefully go over the applied area.
4. Once the residue starts to clear, go back down to the lowest setting for a final cover.
5. leave for a couple of minutes, then buff with a clean microfibre towel.

The post SPECTRUM appeared first on Molecular UK.