This is one of our alkaline based snow foams that has the awesome cleaning power of most TFRs. When the thick layer of foam has been applied to your vehicle, you can notice the product working instantly, loosening traffic film, bugs and grime within seconds.

KEY BENEFITS

. Super easy to use formula

. Excellent cling/dwell time

. Awesome cleaning power

. Loosens dirt, grime, traffic film and bugs

. Use at the pre-wash stage prior to contact wash

. Use on all exterior surfaces including paintwork, glass, plastic, rubber etc.

DIRECTIONS FOR USE:

1. Dilute up to 20 parts SUPER MOUSSE to 1 parts water in your foaming lance bottle (typical use is 10:1).
2. Apply to vehicle bodywork working from bottom to top.
3. Leave to dwell for 5 – 10 minutes.
4. Rinse off with a pressure washer or hose.

If you would like any of these products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post SUPER MOUSSE appeared first on Molecular UK.

For best results use the 2 bucket method, one with the solution in, another of just water to wash any excess dirt from your wash mitt in stages during the application. Use grit guards if you have them.

DIRECTIONS FOR USE:

1. Add a squirt (roughly 1-4 caps) of Auto Shine into a bucket of water, use a grit guard if you have one.
2. Submerge your wash mitt or brush in the solution then apply to the vehicle bodywork.
3. Wipe the vehicle top to bottom with your wash mitt. If you are using the recommended 2 bucket method, frequently rinse your wash mitt in the second bucket of water.
4. Once your vehicle has been fully lathered, wash off with a pressure washer or hose then dry.

The post AUTO SHINE appeared first on Molecular UK.

For best results use the 2 bucket method, one with the solution in, another of just water to wash any excess dirt from your wash mitt in stages during the application. Use grit guards if you have them.

DIRECTIONS FOR USE:

1. Add a squirt (roughly 2-5 caps) of Tractor Shampoo into a bucket of water, use a grit guard if you have one.
2. Dunk your wash mitt/brush in the solution then apply to the vehicle bodywork.
3. Wipe the vehicle top to bottom with your wash mitt/brush. If you are using the recommended 2 bucket method, frequently rinse your wash mitt in the second bucket of water.
4. Once your vehicle has been fully lathered, wash off with a pressure washer or hose then dry.

The post TRACTOR SHAMPOO appeared first on Molecular UK.

Directions for use:

1. Pre-dilute with water depending on soiling.
2. Adjust the detergent control on your pressure cleaning system as required. (typically 1% – 5%).
3. Rinse thoroughly using high pressure water.

Dilution Guide:

• Heavy Soiling: Dilute 1:1 parts water
• Medium Soiling: Dilute 1:4 parts water
• Light Soiling: Dilute up to 1:20 parts water.

Molecular Tip: Pre-soaking will improve economy.

The post CHASSIS CLEANER EXTREME appeared first on Molecular UK.

For the best results it is recommended for use in high pressure cleaning systems, but it can be diluted into a low pressure spray if necessary.

Directions For Use:

Set the detergent control to give a 1% – 5% solution or as required.
Apply evenly, starting at the bottom and working your way upwards.
Allow up 5 minutes contact time, then wash off thoroughly with clean high pressure water.

The post TRACTOR WASH & WAX appeared first on Molecular UK.

Cleans vehicle exterior with ease. Breaks down traffic film, grime, dirt and grease. This product was formulated as a non-contact cleaner, reducing the chances of scratches and swirls.

Directions For Use:

Adjust your machine’s detergent control and air flow to the required rate, or dilute no more than 1:10 parts water in your foaming lance bottle.
Apply the solution evenly, covering your vehicle from top to bottom. Allow up to 5 minutes contact time.
Wash the solution off with clean high pressure water.

The post TRACTOR FOAM appeared first on Molecular UK.

Tractor Wash is to be used in conjunction with high pressure cleaning systems. Can be diluted into a low pressure spray if needed.

Directions For Use:

Set the detergent control to give a 1% – 5% solution or as required.
Apply evenly, starting at the bottom and working your way upwards.
Allow up 5 minutes contact time, then wash off thoroughly with clean high pressure water.

The post TRACTOR WASH appeared first on Molecular UK.

Tractor Sanitiser is the perfect cleaner for abattoirs, food factories, food carrying vehicles and other areas where it is vital for a high standard of hygiene. Used for cleaning plant, equipment, utensils, floors, walls and other hard surfaces.

Directions For Use:

1. Set the detergent control to give a 1% – 5% solution at the nozzle as required.
2. Apply the solution to the area being cleaned and allow up to 5 minutes contact time for activation.
3. After suitable contact time, rinse thoroughly with clean high pressure water.

The post TRACTOR SANITISER appeared first on Molecular UK.

Safely removes dirt, oil, grease and grime with ease. A biodegradable product that is safe to use on ferrous and non-ferrous metals, plastics, rubber and glass.

Dilute as required; typically between 1:50 – 1:100 parts water.

Key benefits from our Ultrasonic Cleaner Fluid:

– Water soluble

– Non-flammable

– Non-toxic

– Biodegradable

– Highly Concentrated

– Removes dirt, grime, grease and oil

Always test sample diluted solution prior to full application.

.

If you would like products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post ULTRASONIC CLEANING FLUID appeared first on Molecular UK.

Made to use for professional commercial cleaners. Can be applied by low pressure spray, bucket and sponge or by wheel brush.

Directions For Use:

SHAKE WELL BEFORE USE.

Dilute one part product with up to 8 parts water, or use as required.
Apply by brush or low pressure hand spray.
Rinse off with plenty of water after suitable contact time.

CAUTION:

• Strongly acidic. A test area should be tried before total cleaning is attempted. Avoid overspray. Do not allow contact with glass.

DO NOT ALLOW WHEEL ACID TO DRY OR BAKE ON THE SURFACE.

If you would like any of these products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post WHEEL XTREME appeared first on Molecular UK.

Interior Plus can be applied via low pressure spray or by water extraction machines. Simply dilute to the strength required prior to application. If using a wet vac machine, dilute no more than 1:50 parts water.

Directions For Use:

• For machine use dilute into the machine tank to a maximum of 1:50.
• For manual use dilute 1:10 parts water.
• Apply the solution to the effected area.
• Agitate with a brush or sponge paying particular attention to heavy soiling.
• Wipe away with a clean damp cloth or microfibre towel.
• Molecular Tip: Agitate solution for extra foam.

The post INTERIOR PLUS appeared first on Molecular UK.

Carpet Shampoo Xtra has been formulated for professional use through water extraction machines (wet vac). Can also be applied via low pressure sprayer. A highly concentrated product for further economy.

Directions For Use:

• Add 100-200mls per 5 litres of warm water into the solution tank. Experience in different conditions will determine the exact strength required.
• Apply the solution to the area using your preferred application method.
• Agitate with a brush if applied by low pressure sprayer. Wipe dry if needed.
• Allow up to 24 hours to dry.

Molecular Tip: Ventilate well if using to clean vehicle interiors.

NOTE:  Always spot test a small, hidden area before undertaking a full clean. This product is for periodic, Professional cleaning only and not suitable for frequent routine cleaning. Over concentration could cause damage.

The post CARPET SHAMPOO XTRA appeared first on Molecular UK.