Safely removes dirt, oil, grease and grime with ease. A biodegradable product that is safe to use on ferrous and non-ferrous metals, plastics, rubber and glass.

Dilute as required; typically between 1:50 – 1:100 parts water.

Key benefits from our Ultrasonic Cleaner Fluid:

– Water soluble

– Non-flammable

– Non-toxic

– Biodegradable

– Highly Concentrated

– Removes dirt, grime, grease and oil

Always test sample diluted solution prior to full application.

.

If you would like products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post ULTRASONIC CLEANING FLUID appeared first on Molecular UK.

A highly flammable product due to its high solvent content.

DIRECTIONS:

• Apply the solution by brush or low pressure spray.
• Allow 5 – 10 minutes contact time to activate, then rinse off with plenty of clean, high pressure water.
• Can be used in a parts wash machine.

Hazardous Delivery Charges Apply (see delivery & returns for more information)

If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post SOLVENT DEGREASER appeared first on Molecular UK.

Safe to use on acrylic finishes. ALWAYS use in a well ventilated space.

DIRECTIONS:

• Apply Panel Prep to a cloth and lightly rub into the area to be cleaned.
• Wipe off with a separate, dry cloth.
• Repeat if necessary.

Hazardous Delivery Charges Apply (see delivery & returns for more information)

If you would like products for our brand, check out our white label company Powerclean Chemicals Ltd.

The post PANEL PREP appeared first on Molecular UK.

Apply to parts  by means of hand spray.

IMPORTANT NOTE:
Test brakes after cleaning & reassembly

Hazardous Delivery Charges May Apply (see delivery & returns for more information)

If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post BRAKE & CLUTCH appeared first on Molecular UK.

Can be applied by hand/mop or in conjunction with high pressure washing equipment, including industrial floor cleaning equipment.

Dilutions:

• Heavy Soiling: Dilute 1:10 parts water
• Medium Soiling: Dilute 1:20 – 50 parts water
• Light Soiling: Dilute 1:50 – 100 parts water

Directions:

• Floor cleaning equipment; follow your machine manual.
• Pressure washing, set the detergent control to give a 1% – 5% solution.
• Bucket and mop; follow the dilution guide but mix with hot water. Apply then wait to dry.

• If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post POWERTECH PLUS appeared first on Molecular UK.

Directions:

• For general applications dilute Pine Disinfectant 125mls per 5 litres of water (1-40 parts water or 2.5%).
• For certain areas, this concentration may be increased or used undiluted if required.
• Apply by mop, bucket & sponge, pressure washer or your preferred application method.
• Wipe dry if necessary.

If you would like any of these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post PINE DISINFECTANT appeared first on Molecular UK.

Algicide is a non-corrosive, chlorine free product that can be diluted to the strength required. Great for use on motorhome & caravans. Contains a blend of quaternary ammonium compound and non-ionic surfactants.

Directions For Use:

• Dilute 1 part solution to 20 parts water for regular use, as required.
• Apply by brush, mop or low pressure spray & allow up to 15 minutes contact time.
• Agitate with a brush if necessary, then rinse off with clean high pressure water.
• Re-apply a solution of 1 part Algicide to 10 parts clean water to retard further growth.

If you would like any of these products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post ALGICIDE appeared first on Molecular UK.

Squeaky is a safe cleaner to use on all glass finishes including mirrors. A silicone free formulation.

Directions For Use:

1. Spray directly onto the surface area you would like to clean.
2. Wipe with a clean microfibre cloth, paper towel or glass cleaning cloth.
3. Buff with a separate, clean microfibre cloth or paper towel if necessary.

Molecular Tip: For use on film tinted windows, spray a small amount of Squeaky onto a microfibre cloth then wipe the area to be cleaned.

If you would like products for your own brand, check out our white label company: Powerclean Chemicals Ltd.

The post SQUEAKY appeared first on Molecular UK.

Universal was originally formulated years a go for the removal of nicotine stains from roof liners. This makes it the ideal cleaner for all carpets, fabrics and upholstery. Since its development, we have realised that it cleans just about everything. Use to remove traffic film, grime, dirt and grease. Can be used as a pre-spotter.

Directions For Use:

• Pre dilute with water (see dilution guide below).
• Apply the solution by low pressure spray, sponge, brush or your preferred applicator.
• Agitate with a cloth or brush.
• Leave to dwell, then wipe off.

Dilutions:

HEAVY SOILING: Use neat or 1:1 parts water.
MEDIUM SOILING: 1:5 parts water.
LIGHT SOILING: 1:20 parts water.

• Molecular Tip: For carpet & upholstery cleaning, It is recommended that you test for colour-fastnesses before total cleaning is undertaken.

• ---

• If you would like any of these products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post UNIVERSAL appeared first on Molecular UK.

Sterilize Plus is highly concentrated so needs to be diluted prior to application. For use on all hard surfaces, including, walls, worktops, floors and patios. Use Sterilize Plus in car interiors for a clean and sterile cockpit.

This sterilising detergent contains Quaternary Ammonium compound conforming to BS EN 1276.

Sterilize Plus sterilising detergent can also be used on domestic, commercial and industrial patios to clean and assist with stopping the regrowth of algae and mould.

Directions For Use:

• Dilute between 1:10- 1:100 parts water, as required.
• Apply by brush, mop, cloth or low pressure spray.
• Leave to dwell for up to 5 minutes then wipe over with a clean cloth or paper towel.
• For best results, leave surface to dry.

If you would like products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post STERILIZE PLUS appeared first on Molecular UK.

We have put our hand sanitising liquid through the necessary tests and are proud to announce it has been approved under BS EN1276 as well as BS EN1500. Feel secure in knowing our Hand Sanitiser does the job properly. Suitable for industrial, commercial and domestic applications.

Our Hand Sanitising liquid contains 70% of the highest quality alcohol to ensure a full sanitised clean is produced.

Molecular UK Hand Sanitiser is distributed nationwide in bars, restaurants and reception areas to ensure a high standard of hygiene is met.

Please Note: this is a liquid formulation, not a gel.

Check out our Sanitisers category for more sanitising products and cleaners.

Directions For Use:

Place enough product in the palm of your hand then rub together briskly until dry. If any irritation or rash appears please stop and consult a doctor. Do not use on cracked or broken skin.

If you would like products for your own brand, please check out our white label company Powerclean Chemicals Ltd.

The post HAND SANITISER appeared first on Molecular UK.

Directions For Use:

1. Use neat for light soiling or up to 1:3 parts water for light and general cleaning.
2. Adjust the detergent feed as required, typically 1% – 3%.
3. Set the temperature to rough;y between 60° – 70°.
4. Rinse thoroughly using clean high pressure water

Molecular Tip: Pre-soaking will improve economic value.

For a stronger chassis cleaner, please check out Chassius Clay.

If you would like products for your own brand, check out our white label company Powerclean Chemicals Ltd.

The post CHASSIS CLEANER appeared first on Molecular UK.