Proudly Made in the UK
Nationwide Delivery of Cleaning Products
40 Years of Industry Experience
Hydro Blast is a cleaning product like no other. It has been formulated with a blend of materials intended for the easy removal of water from your vehicle. After a full car wash has been undertaken, it’s down to you to remove the remaining water left on the vehicle so you can knuckle down and get on with the finishing stage. Whether that be finishing with a detailing spray, or undertaking a deep polishing routine, this step cannot be done with water still on the vehicle.
Not only does Hydro Blast help the effectiveness of drying your vehicle, but it also helps to keep moisture out of your drying towel. So if you have more than one car to clean, you haven’t got to keep changing your towel so often. Once Hydro Blast has been applied you can expect light protection from rain and water for roughly 2 weeks. You can use this product in a foaming lance, in conjunction with your pressure washer or diluted in a low pressure spray. Suitable for professional car washing, valeting, and detailing, or personal use.
DIRECTIONS FOR USE:
SHAKE WELL BEFORE USE.
1. Ensure the vehicle has been thoroughly cleaned, removing all dirt & grime.
2. Dilute up to 1 part product to 10 parts water in a clean foaming lance bottle.
3. Apply the solution to a wet vehicle working from top to bottom.
4. Rinse thoroughly with a pressure washer or hose.
5. Dry with a clean microfibre drying towel.
Hazards and Warnings
Do not apply to a dry vehicle. Do not apply in direct sunlight. Do not apply to a hot vehicle. Do not allow product to dry or bake on the vehicle. Although this product is considered non-hazardous in normal use, care should be taken to avoid prolonged contact with eyes and skin. Wash spillages away with plenty of water.