SPECTRUM

New & Used Vehicle Polish

£12.00£52.00 inc VAT

The ideal exterior polish to restore lightly faded paintwork and cover light scratches. An easy to use formula containing a blend of waxes including carnauba, Leaving your vehicle with a long lasting and resilient shine.

Proudly Made in the UK

Nationwide Delivery of Cleaning Products

40 Years of Industry Experience

Additional Information


Spectrum is an easy to use vehicle polish with added mild cut to restore lightly faded vehicle paint work and light scratches. This special formula contains a blend of waxes, including carnauba wax, to give your car a deep, long lasting, resilient shine. An effective product that can be used on new and used cars. Suitable for car detailing, valeting, and commercial use. Always shake well before use. Do not apply in direct sunlight or if the vehicle is hot to the touch.


DIRECTIONS FOR USE:
  • Hand Application:
  1. Ensure the vehicle paintwork is clean, dry and out of direct sunlight.
  2. Apply 2-4 drops of Spectrum to your foam applicator pad and apply to the vehicle surface using circular motions. Work 1 small panel at a time. Do not allow to dry.
  3. Buff with a clean microfibre cloth.
  • Machine Polish (Rotary):
  1. Ensure the vehicle paintwork is clean, decontaminated, dry and out of direct sunlight.
  2. Apply 2-4 inch drops onto the polishing pad and spread evenly onto 1 body panel at a time using the lowest speed setting. If applying to a bonnet, work on 1/2 of the panel at a time.
  3. Once area has been covered, increase the speed to no more than 1000RPM and carefully go over the applied area.
  4. Once the residue starts to clear, go back down to the lowest setting for a final cover.
  5. Leave for a couple of minutes, then buff with a clean microfibre towel.
  • Machine Polish (Dual Action):
  1. Ensure the vehicle paintwork is clean, decontaminated, dry, and out of direct sunlight.
  2. Apply 2-4 inch drops onto the polishing pad and spread evenly onto 1 body panel at a time using the lowest speed setting. If applying to a bonnet, work on 1/2 of the panel at a time.
  3. Once area has been covered, increase the speed to no more than 4000 OPMs and carefully go over the applied area.
  4. Once the residue starts to clear, go back down to the lowest setting for a final cover.
  5. leave for a couple of minutes, then buff with a clean microfibre towel.

Hazards and Warnings


CONTAINS SILICONE. Ensure vehicle is cool to the touch, clean, dry and out of direct sunlight prior to application. Flammable liquid and vapour. Causes skin irritation. Keep out of the reach of children. IF SWALLOWED: Immediately call a doctor or physician. IF ON SKIN: Wash with soap and water. IF IN EYES: Rinse cautiously with water for several minutes.

Reviews


Tried their TFR and can only say what an impressive product it is. Will be ordering more of their product range to use in my Classic and Retro cat collection as well as my modern cars and motorhome. Highly recommended. Review via Trustpilot
DOMINIC LE FANU
Products get the thumbs up from me. Mirage doesn't powder up (which I hate) and was easy to use and buff. Both cars were cleaned and drew plenty of attention. Review via email
Mel Gray
Great products that easily match or if not beat some of the marketing leaders. Would highly recommend and the team are very polite and friendly 🙂👍🏻 Review via Trustpilot
Chris Gedge (East Anglian Competitions)